Linux und ATI

[Callisto]

Beim selbstkompilieren kommt der gleiche Fehler wieder (falsche Auflösung)
Hier dann mal die xorg.conf:

Code:

# /.../
# SaX generated X11 config file
# Created on: 2008-01-12T11:24:18+0100.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/share/fonts/misc:unscaled"
  FontPath     "/usr/share/fonts/local"
  FontPath     "/usr/share/fonts/75dpi:unscaled"
  FontPath     "/usr/share/fonts/100dpi:unscaled"
  FontPath     "/usr/share/fonts/Type1"
  FontPath     "/usr/share/fonts/URW"
  FontPath     "/usr/share/fonts/Speedo"
  FontPath     "/usr/share/fonts/PEX"
  FontPath     "/usr/share/fonts/cyrillic"
  FontPath     "/usr/share/fonts/latin2/misc:unscaled"
  FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/Type1"
  FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/share/fonts/baekmuk:unscaled"
  FontPath     "/usr/share/fonts/japanese:unscaled"
  FontPath     "/usr/share/fonts/kwintv"
  FontPath     "/usr/share/fonts/truetype"
  FontPath     "/usr/share/fonts/uni:unscaled"
  FontPath     "/usr/share/fonts/CID"
  FontPath     "/usr/share/fonts/ucs/misc:unscaled"
  FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/misc:unscaled"
  FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/Type1"
  FontPath     "/usr/share/fonts/misc/sgi:unscaled"
  FontPath     "/usr/share/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail" "on"
  Option       "IgnoreABI" "on"
EndSection

Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "dri"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "de"
  Option       "XkbModel" "microsoftpro"
  Option       "XkbRules" "xfree86"
  Option       "XkbVariant" "nodeadkeys"
EndSection


Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "5"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "Creative USB Mouse"
  Option       "Protocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
  Option       "CalcAlgorithm" "XServerPool"
  DisplaySize  304 228
  HorizSync    30-68
  Identifier   "Monitor[0]"
  ModelName    "LENOVO LCD MONITOR"
  Option       "DPMS"
  VendorName   "LEN"
  VertRefresh  43-60
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
EndSection


Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1400x1050" "1280x1024" "1024x768" "800x600" 
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1400x1050" "1280x1024" "1024x768" "800x600" 
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1400x1050" "1280x1024" "1024x768" "800x600" 
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1400x1050" "1280x1024" "1024x768" "800x600" 
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "Device"
  BoardName    "Framebuffer Graphics"
  BusID        "1:0:0"
  Driver       "fglrx"
  Identifier   "Device[0]"
  Option       "FSAADisableGamma" "no"
  Option       "Capabilities" "0x00000000"
  Option       "ScreenOverlap" "0"
  Option       "FSAAMSPosX4" "0.000000"
  Option       "FSAAMSPosY1" "0.000000"
  Option       "mtrr" "off"
  Option       "FSAAMSPosX5" "0.000000"
  Option       "FSAAMSPosY2" "0.000000"
  Option       "FSAAScale" "1"
  Option       "ForceGenericCPU" "no"
  Option       "FSAAMSPosY3" "0.000000"
  Option       "GammaCorrectionI" "0x00000000"
  Option       "FSAAMSPosX0" "0.000000"
  Option       "FSAAMSPosY4" "0.000000"
  Option       "no_accel" "no"
  Option       "FSAACustomizeMSPos" "no"
  Option       "FSAAMSPosY5" "0.000000"
  Option       "UseFastTLS" "2"
  Option       "BlockSignalsOnLock" "on"
  Option       "FSAAEnable" "no"
  Option       "GammaCorrectionII" "0x00000000"
  Option       "VideoOverlay" "on"
  Option       "no_dri" "no"
  Option       "FSAAMSPosX1" "0.000000"
  Option       "PseudoColorVisuals" "off"
  Option       "StereoSyncEnable" "1"
  Option       "UseInternalAGPGART" "no"
  Option       "FSAAMSPosX2" "0.000000"
  Option       "OpenGLOverlay" "off"
  Option       "Stereo" "off"
  Option       "CenterMode" "off"
  Option       "FSAAMSPosX3" "0.000000"
  Option       "FSAAMSPosY0" "0.000000"
  Option       "KernelModuleParm" "locked-userpages=0"
  Option       "EnablePrivateBackZ" "no"
  Option       "backingstore" "true"
  VendorName   "VESA"
EndSection



Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
  Screen       "Screen[0]"
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
  Option       "DAMAGE" "false"
  Option       "Composite" "false"
EndSection

Die richtige Auflösung währe 1400x1050. Er nimmt aber immer wieder die zweite in der Liste.
Außerdem tretten noch folgende andere Bugs auf:
Beim herunterfahren oder wenn ich in die Console wechsle zittert der Bildschirm hin und her. Außerdem hab ich bei der Videowidergabe Fehler. Das alles tritt eben mit den Standardtreibern nicht auf.
radeonhd hab ich noch nicht getestet.

edit: radeonhd ist nun installiert und läuft. Nur hats leider keine 3D-Unterstützung, zumindest sagt mir das Linux es keine 3D-Beschleunigung aktivieren kann.