Scriptsuche

Hollerö Gemeinde.

Ich habe jetzt schon einige Seiten durchsucht, aber leider noch nicht das Script gefunden, das ich suche. Vllt. könnt ihr mir da weiterhelfen.

Ich suche ein "Spuren-im-Schnee"Script, bei dem quasi Fußspuren im Schnee/Sand beim Laufen hinterlassen werden, die nach einiger Zeit wieder verschwinden. Wenn das geht, auch bei Ereignissen (also NPCs), aber das muss nicht.

Ich hab damals mal eins runtergeladen und wieder ausgegraben:

Code:

---

=begin
 ============
  Dynamic Footprints - version 1.0 (2005-11-07)
 ============
  by Wachunga

 0.95 - original release
 1.0 - fixed a small bug with directional footprints and
      updated the compatibility list
 
 SETUP:
 1) From the database (Tileset tab), give the appropriate tiles of any
    tilesets that you want to show footprints (e.g. sand in "Desert",
    snow in "Snow Field") the terrain tag 1.
 2) Place the footprints file in the Graphics/Tilesets folder.
 
 To prevent an event from having any footprints (e.g. birds), include
 somewhere in its name.

 (If using non-RTP sprites, you may want to create customized footprints.)

 FEATURES:
 * customizable duration footprint fading (optional)
 * direction-specific footprints (optional)
 * rounded footprints paths
 * overlapping footprints supported
 * handles move events (jumping, speed changes, etc) and teleportation

 COMPATIBILITY:
 1) Cogwheel's Pixel Movement script - unfortunately, pixel movement by its
    very nature isn't very compatible with footprints (short of using sprites
    or pictures instead of a tileset) because a character can move part way
    across a tile without footprints appearing.
   
  2) Near Fantastica's Squad Based Movement/Action Battle System script -
    make sure it is below this script
 
  3) Near Fantastica's Updated Day Night script - again, make sure it is below
    this script
 
  4) Baskinein's Animated Sprite script - see:
    http://www.rmxp.net/forums/index.php?s=&sh...ndpost&p=261921
   
  5) Fukuyama's Caterpillar script - to only have one set of footprints
    for the whole group, no modifications are necessary (just make sure his
    script is above this one). To have a separate (overlapping) set of
    footprints for each character, uncomment (by moving the "= end") the
    following lines:

module Train_Actor
class Game_Party_Actor < Game_Character   
  def move_down(turn_enabled = true)
    if turn_enabled
      turn_down
    end
    if passable?(@x, @y, Input::DOWN)
      turn_down
      @y += 1
      increase_steps
    end
  end
  def move_left(turn_enabled = true)
    if turn_enabled
      turn_left
    end
    if passable?(@x, @y, Input::LEFT)
      turn_left
      @x -= 1
      increase_steps
    end
  end
  def move_right(turn_enabled = true)
    if turn_enabled
      turn_right
    end
    if passable?(@x, @y, Input::RIGHT)
      turn_right
      @x += 1
      increase_steps
    end
  end
  def move_up(turn_enabled = true)
    if turn_enabled
      turn_up
    end
    if passable?(@x, @y, Input::UP)
      turn_up
      @y -= 1
      increase_steps
    end
  end
end
end

=end

#----------------------------------------------------------------------
# Footprints for six situations (down->up, left->right, down->left,
# left->up, up->right and right->down) are required (twelve for
# directional footprints). See the provided footprints template
# (footprints_template.png) for specific details, noting
# that the right half of the template can be empty if using the default
# of non-directional footprints (i.e. leaving FP_DIRECTIONAL = false).
FP_FILE = "footprints_default"
#----------------------------------------------------------------------
# FP_DIRECTIONAL specifies whether there are direction-specific
# footprints (e.g. footprints from player moving up are different
# from those left when player is moving down)
FP_DIRECTIONAL = false
#----------------------------------------------------------------------
# Terrain tag(s) as set in the database
FP_TAG = 4
#----------------------------------------------------------------------
# How much time elapses before footprints begin to fade
FP_BEFORE_FADE_TIME = 30
# After beginning to fade, how long the fading process actually takes
FP_FADE_TIME = 120
# Note: it's possible to maintain footprints indefinitely (with
# FP_FADE_TIME = 0), but if the player opens a menu or changes maps,
# the footprints won't be saved. To allow them to persist even then,
# use Near's Dynamic Maps script (slight modifications would be needed).
#----------------------------------------------------------------------
# tilemap indexes (do not modify)
# regular:
FP_DU = 384
FP_LR = 385
FP_DL = 386
FP_LU = 387
FP_UR = 388
FP_RD = 389
# directional:
FP_UD = 512
FP_RL = 513
FP_DR = 514
FP_RU = 515
FP_UL = 516
FP_LD = 517

#----------------------------------------------------------------------

class Spriteset_Map
 attr_accessor :footprints 
 attr_accessor :fp_tilemap
 def initialize
  @viewport1 = Viewport.new(0, 0, 640, 480)
  @viewport2 = Viewport.new(0, 0, 640, 480)
  @viewport3 = Viewport.new(0, 0, 640, 480)
  @viewport2.z = 200
  @viewport3.z = 5000
  @tilemap = Tilemap.new(@viewport1)
  @tilemap.tileset = RPG::Cache.tileset($game_map.tileset_name)
  for i in 0..6
    autotile_name = $game_map.autotile_names[i]
    @tilemap.autotiles[i] = RPG::Cache.autotile(autotile_name)
  end
  @tilemap.map_data = $game_map.data
  @tilemap.priorities = $game_map.priorities
  @panorama = Plane.new(@viewport1)
  @panorama.z = -1000
  @fog = Plane.new(@viewport1)
  @fog.z = 3000
  @character_sprites = []
  for i in $game_map.events.keys.sort
    sprite = Sprite_Character.new(@viewport1, $game_map.events[i])
    @character_sprites.push(sprite)
  end
  @character_sprites.push(Sprite_Character.new(@viewport1, $game_player))
  @weather = RPG::Weather.new(@viewport1)
  @picture_sprites = []
  for i in 1..50
    @picture_sprites.push(Sprite_Picture.new(@viewport2,
      $game_screen.pictures[i]))
  end
  @timer_sprite = Sprite_Timer.new

  # Dynamic Footprints additions begin
  @footprints = []
  fp_tileset = FP_DIRECTIONAL ? Bitmap.new(256,1024) : Bitmap.new(256,512)
  # make a column for each footprint image
  # right -> down
  fp_tileset.blt(160, 0, RPG::Cache.tileset(FP_FILE), Rect.new(0, 0, 32, 32))
  # up -> right
  fp_tileset.blt(128, 0, RPG::Cache.tileset(FP_FILE), Rect.new(0, 32, 32, 32)) 
  # left -> right 
  fp_tileset.blt(32, 0, RPG::Cache.tileset(FP_FILE), Rect.new(0, 64, 32, 32))   
  # down -> left
  fp_tileset.blt(64, 0, RPG::Cache.tileset(FP_FILE), Rect.new(32, 0, 32, 32))
  # left -> up
  fp_tileset.blt(96, 0, RPG::Cache.tileset(FP_FILE), Rect.new(32, 32, 32, 32)) 
  # down -> up
  fp_tileset.blt(0, 0, RPG::Cache.tileset(FP_FILE), Rect.new(32, 64, 32, 32))

  # fill out each column, making copies of the image with decreasing opacity
  0.step(5*32, 32) do |x|
    opacity = 255
    0.step(15*32, 32) do |y|
      fp_tileset.blt(x, y, fp_tileset, Rect.new(x, 0, 32, 32), opacity)
      opacity -= 16
    end
  end

  if FP_DIRECTIONAL
    # down -> right
    fp_tileset.blt(160, 512, RPG::Cache.tileset(FP_FILE), Rect.new(64, 0, 32, 32))
    # right -> up
    fp_tileset.blt(128, 512, RPG::Cache.tileset(FP_FILE), Rect.new(64, 32, 32, 32)) 
    # right -> left
    fp_tileset.blt(32, 512, RPG::Cache.tileset(FP_FILE), Rect.new(64, 64, 32, 32))   
    # left -> down
    fp_tileset.blt(64, 512, RPG::Cache.tileset(FP_FILE), Rect.new(96, 0, 32, 32))
    # up -> left
    fp_tileset.blt(96, 512, RPG::Cache.tileset(FP_FILE), Rect.new(96, 32, 32, 32)) 
    # up -> down
    fp_tileset.blt(0, 512, RPG::Cache.tileset(FP_FILE), Rect.new(96, 64, 32, 32))
   
    0.step(5*32, 32) do |x|
      opacity = 255
      512.step(32*32, 32) do |y|
        fp_tileset.blt(x, y, fp_tileset, Rect.new(x, 512, 32, 32), opacity)
        opacity -= 16
      end
    end 
  end
 
  @fp_tilemap = Tilemap.new(@viewport1) 
  @fp_tilemap.tileset = fp_tileset
  @fp_tilemap.map_data = Table.new($game_map.width, $game_map.height, 3)
  # end Dynamic Footprints additions
 
  update
 end

 alias fp_dispose dispose
 def dispose
  @fp_tilemap.dispose
  fp_dispose
 end

 alias fp_update update
 def update
  @fp_tilemap.ox = $game_map.display_x / 4
  @fp_tilemap.oy = $game_map.display_y / 4
  @fp_tilemap.update
  unless FP_FADE_TIME == 0
    for fp in @footprints
      if fp.time > 1
        fp.time -= 1
        if fp.fade and (FP_FADE_TIME - fp.time) % (FP_FADE_TIME/16.0) < 1
          @fp_tilemap.map_data[fp.x,fp.y,fp.z] += 8
        end
      else
        if not fp.fade
          # begin fading
          fp.time = FP_FADE_TIME
          fp.fade = true
        else       
          @fp_tilemap.map_data[fp.x,fp.y,fp.z] = 0
          @footprints.delete(fp)
        end
      end
    end
  end
  fp_update
 end
 
  def show_footprints(fp_index,fp_x,fp_y)
    # start with first layer, then stack footprints as necessary
    fp_z = 0
    if @fp_tilemap.map_data[fp_x,fp_y,fp_z] == 0
    @fp_tilemap.map_data[fp_x,fp_y,fp_z] = fp_index
    else
    fp_z = 1
    if @fp_tilemap.map_data[fp_x,fp_y,fp_z] == 0
      @fp_tilemap.map_data[fp_x,fp_y,fp_z] = fp_index
    else
      fp_z = 2
      if @fp_tilemap.map_data[fp_x,fp_y,fp_z] != 0
        # delete the existing footprint at these coords from the list
        # (to prevent having multiples)
        for i in @footprints.reverse
          if i.x == fp_x and i.y == fp_y and i.z == fp_z
            @footprints.delete(i)
            break
          end
        end
      end
      @fp_tilemap.map_data[fp_x,fp_y,fp_z] = fp_index
    end
    end
    @footprints.push(Footprint.new(fp_x,fp_y,fp_z))   
  end 

end

#-------------------------------------------------------------------------------

class Game_Event < Game_Character
  alias fp_ge_init initialize
  def initialize(map_id, event)
  fp_ge_init(map_id, event)
  if @event.name.upcase.include?('NOFOOT')
    @fp_id = nil
    end
  end
end

#-------------------------------------------------------------------------------

class Game_Character

 alias fp_gc_init initialize
 def initialize
  fp_gc_init
  # 1st argument = second last x/y
  # 2nd argument = last x/y
  @last_x = [0,0]
  @last_y = [0,0]
  @fp_id = 0 # default footprints
 end

 def footprints
  # determine which prints to draw and where
  if terrain_tag(@last_x[1],@last_y[1]) != FP_TAG
    return
  end
  fp_index = nil
  # left
  if @x > @last_x[1]
    if @last_y[1] > @last_y[0]
      fp_index = FP_UR
    elsif @last_y[1] < @last_y[0]
      fp_index = FP_DIRECTIONAL ? FP_DR : FP_RD
    else
      fp_index = FP_LR
    end
  else
    # right
    if @x < @last_x[1]
      if @last_y[1] > @last_y[0]
        fp_index = FP_DIRECTIONAL ? FP_UL : FP_LU
      elsif @last_y[1] < @last_y[0]
        fp_index = FP_DL
      else
        fp_index = FP_DIRECTIONAL ? FP_RL : FP_LR
      end
    else
      # up
      if @y < @last_y[1]
        if @last_x[1] > @last_x[0]
          fp_index = FP_LU
        elsif @last_x[1] < @last_x[0]
          fp_index = FP_DIRECTIONAL ? FP_RU : FP_UR
        else
          fp_index = FP_DU
        end
      # down
      elsif @y > @last_y[1]
        if @last_x[1] > @last_x[0]
          fp_index = FP_DIRECTIONAL ? FP_LD : FP_DL
        elsif @last_x[1] < @last_x[0]
          fp_index = FP_RD
        else
          fp_index = FP_DIRECTIONAL ? FP_UD : FP_DU
        end
      end
    end
  end
  if fp_index != nil
    fp_x = @last_x[1]
    fp_y = @last_y[1]
    $scene.spriteset.show_footprints(fp_index,fp_x,fp_y)
  end
 end

  def moveto(x, y)
    @x = x
    @y = y
    @real_x = x * 128
    @real_y = y * 128
    if @fp_id != nil
      # track the last positions
      @last_x = [@x,@x]
      @last_y = [@y,@y]
    end
  end
 
  def increase_steps
    @stop_count = 0
    # show footprints if enabled for this character
    if @fp_id != nil and $scene.is_a?(Scene_Map)
      footprints
      # track the last positions
      @last_x.shift
      @last_x.push(@x) 
      @last_y.shift
      @last_y.push(@y) 
    end
  end

  def terrain_tag(x=@x,y=@y)
    return $game_map.terrain_tag(x, y)
  end

  def update_jump
    @jump_count -= 1
    @real_x = (@real_x * @jump_count + @x * 128) / (@jump_count + 1)
    @real_y = (@real_y * @jump_count + @y * 128) / (@jump_count + 1)
    if @fp_id != nil and @jump_count == 0
      # track the last positions
      @last_x = [@x,@x]
      @last_y = [@y,@y]     
    end
  end 
 
end

#-------------------------------------------------------------------------------

class Scene_Map
  attr_reader :spriteset
 
  # only change is a couple of (commented) sections to prevent teleporting
  # within same map from losing footprints when the spriteset is recreated
  def transfer_player
    $game_temp.player_transferring = false
    if $game_map.map_id != $game_temp.player_new_map_id
      $game_map.setup($game_temp.player_new_map_id)
    else # Dynamic Footprints
      fp = @spriteset.footprints
      md = @spriteset.fp_tilemap.map_data
    end
    $game_player.moveto($game_temp.player_new_x, $game_temp.player_new_y)
    case $game_temp.player_new_direction
    when 2
      $game_player.turn_down
    when 4
      $game_player.turn_left
    when 6
      $game_player.turn_right
    when 8
      $game_player.turn_up
    end
    $game_player.straighten
    $game_map.update
    @spriteset.dispose
    @spriteset = Spriteset_Map.new
    if fp != nil or md != nil # Dynamic Footprints
      @spriteset.footprints = fp
      @spriteset.fp_tilemap.map_data = md
    end
    if $game_temp.transition_processing
      $game_temp.transition_processing = false
      Graphics.transition(20)
    end
    $game_map.autoplay
    Graphics.frame_reset
    Input.update
  end
end

#-------------------------------------------------------------------------------

class Footprint
 attr_reader :x
 attr_reader :y
 attr_reader :z
 attr_accessor :time
 attr_accessor :fade

 def initialize(x,y,z)
  @x = x
  @y = y
  @z = z
  @time = FP_BEFORE_FADE_TIME
  @fade = false
 end

end

---

habs aber nie getestet.

Vielen Dank, genau das was ich gesucht habe :)

Ich hab nur ein Problem mit der Anordung der Spuren. ^_^ Ich weis nicht ob die richtungsmäßig wie in einem Charset sind..

EDIT: Habs soweit rausgefunden, allerdings scheint das Script doch einen kleinen Fehler zu haben. Wenn man vertikal läuft zeigt es keine Spuren an. :( Die Grafik dafür erkennt er, denn wenn man länger stehen bleibt, mit Blick nach oben oder unten, zeigt es auch für das Tile die richtigen Spuren an. Nur wenn man dann weiterläuft werden die nicht mehr angezeigt.

Ach, ganz übersehen:
http://www.npshare.de/files/324c9d2e...ts_default.png
Das war als Grafik dabei. Ich weiß aber nicht ob das jetzt die Lösung ist.

Vielen Dank, genau das war die Lösung ^____^ funzt alles :)